
Mass Combi 12/2200-100 Remote (230 V)
Delivery includes Mass Combi 12/2200-100 + ICC remote
panel + Apc remote panel.
A Mastervolt Mass Combi offers best price/quality ratio. The
exceptionally reliable Mass Combi series offers a lot of power at a
highly competitive price. In addition, the four models are also
available in two customer-friendly variations with remote control
or MasterBus.
The powerful 3-step+ battery charger guarantees maximum battery
life and can simultaneously charge two battery banks. The inverter
with high peak power starts even the heaviest loads, with the Mass
Combi 12/1600 being easily sufficient for your espresso machine. A
built-in distribution system switches between grid and inverter
power, while two separate AC outputs allow users to connect
critical loads to a preferred group.
Grid connected solar power system with energy
storage
The Mass Combi enables the expansion of a in batteries. This way
the majority of the generated energy is used, and users are less
dependent on the electricity grid. In this setup, the Mass Combi is
part of a MasterBus controlled system.
Benefits of the Mass Combi:
- Compact, lightweight and no hum thanks to HF technology.
- High yield and more power from your batteries.
- Intelligent 3-step+ battery charger with low DC ripple current
for fast charging times and long battery life. - Charges two individual battery banks simultaneously.
- Quiet, powerful inverter with 200 % peak power.
- Power Assist: prevents blown fuses.
- Pure sine wave energy prevents failures and damage to sensitive
equipment such as adapters. - Dual AC outputs to separate critical equipment from heavy
loads. - Higher yields possible via parallel switching (only for 2200
and 2600 W models). - Professional connections ensure fast installation and
operational security. - CE approved and E-marking for mobile applications.
Maximise your convenience with a Mass Combi package deal
Combi deal with MasterBus (MB version)
To integrate the Mass Combi into a MasterBus system in a simple
manner, Mastervolt can deliver all Mass Combi models in a MasterBus
version. The relevant product code includes the Mass Combi model of
your choice, complemented by a .
Combi deal with remote control (Remote
version)
In addition, Mastervolt can provide all Mass
Combi models in a Remote version so that the AC and DC power status
can be monitored remotely. The relevant product code includes the
Mass Combi model of your choice, plus an and an remote control
panel.
Specifications
| Specifications sine wave inverter | ||
| Nominal DC voltage | 12 V (10-15 V) | |
| Output voltage | 230 V (plus or minus 5 %), adjustable 180-250 V |
|
| Output frequency | 50/60 Hz (plus or minus 0.05 %), configurable |
|
| Output waveform | true sine, Thd < 2.5 % under standard conditions |
|
| Continuous power at 25 degreesC / 77 degreesF, cos phi 1 | 2150 W | |
| Max. peak load | 4000 W | |
| Max. efficiency | ? 90 % | |
| Max. ripple on DC (battery at full load) | < 5 % | |
| No-load power consumption on DC (ON/inverter OFF/OFF) | 9 W / 0.1 W / 0 W / 0.5 W |
|
| Parallel configuration | yes, up to 2 units | |
| 3-Phase configuration | no | |
| Synchronise with mains/generator | yes | |
| Specifications battery charger | ||
| Input voltage range | 180-265 V | |
| Max. input current | 7.2 A | |
| Max. charge current at 25 degreesC / 77 degreesF | 100 A at 14.25 V, adjustable |
|
| Secondary charger output voltage | 12 V | |
| Secondary charger output current | 5 A | |
| No-load power consumption on AC | < 15 W | |
| Battery temperature sensor | yes, included | |
| Battery voltage sense | automatic compensation |
|
| Specifications transfer system | ||
| AC input (generator) | 50 A (25 A switched, to short break output) |
|
| AC output 1 | 25 A (short break output) |
|
| AC output 2 | 50 A (power output) | |
| AC input fuse | yes, resettable | |
| Transfer speed | half seamless (25 ms max., 10 ms typical) |
|
| Transfer voltage range | 180-265 V | |
| Transfer frequency range | 45-65 Hz | |
| General specifications | ||
| Display/read-out | LED display | |
| Dimensions, hxwxd | 496 x 318 x 156 mm 19.5 x 12.5 x 6.1 inch |
|
| Weight | 11 kg 24.3 lb |
|
| Delivered with | ICC remote panel and Apc remote panel |
|
| Approvals | CE, ABYC, E4 | |
| Technical specifications | ||
| Charge characteristic | 3-step+ (IUoUo, fully automatic), Equalize |
|
| Battery types | AGM/gel/MLI/flooded/spiral/traction | |
| Recommended battery capacity | approx. 200-600 Ah (based on gel batteries, may differ for other types) |
|
| Ground relay | yes, configurable | |
| Temperature range (ambient temp.) | -25 degreesC to 60 degreesC, derating > 25 degreesC -13 degreesF to 140 degreesF |
|
| Cooling | maintenance-free vario fans |
|
| Protection degree | IP23 (vertical mounting) |
|
| Safety class | IEC protection class I |
|
| Humidity protection | conformal coating, max. 95 % relative humidity, non condensing |
|
| Protections | over temperature, over load, short circuit, high/low battery voltage |
|
| Power Assist | yes | |
| MasterBus compatible | yes, in combination with a MasterBus Combi Interface |
|
Product Data Sheet



Reviews
There are no reviews yet.